| After-sales Service: | Online Service |
|---|---|
| Warranty: | 3 Months |
| Type: | Hydraulic Rotary Steel Grapple |
| Application: | Excavator |
| Certification: | ISO9001: 2000 |
| Condition: | New |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
PC200 PC210 PC220 PC230 PC240 Excavator Attachment Hydraulic Grapple Bucket Rotary Hydraulic Grab Bucket Grapple for 20 22tons Excavator
| Product name | Hydraulic Rotary Steel Grapple |
| Model | HL200MGY-3 |
| Application model | PC200 PC210 PC220 PC230 PC240 |
| Max. opening width | 2250 mm |
| Rotating oil flow | 30-40L/min |
| Rotating pressure | 100-130Kg/cm2 |
| Operating oil flow | 100-150 L/min |
| Operating pressure | 180-220Kg/cm2 |
| Suitable excavator | 20 21 22 23 24tons |
| Application | Handling and unloading of wood, stone and steel; laying of medium pipes for urban sewage; modeling operation of river and sea dam,etc. |
Product Maintenance
1.Daily checkpoint: Whether there is any damage or deformation of the body, hose interface leakage, damage to the pin and bushing and its replacement
cycle,check the oil level of the gear, check the bolt and nut, the gear
tightening loose state.
2.Conventional checkpoint: The seals and rotating parts of the hydraulic
cylinder will wear out, and should be replaced in time after reaching the
service life. Replacement parts should be matched with the original factory. Check the rotating shaft in 360 degrees,whether easy to work from any
Angle, check that there is enough lubricant on the rotating shaft and bolts
are tight enough.
3. Check the tightening state of bolts, install new bolts, check 8 hours after
use, and ensure that the tightened bolts are not loose. Damaged bolts
should be replaced in time. Bolts should be replaced after approximately
1500 hours or 12 months of use after installation.
4. It is recommended to check whether there is oil leakage regularly to
ensure that there is no fault and the product can run smoothly. Every 4 hours: fill lubricating oil, lubricate shaft pin and rotating gear once;
Every half year or 1000 hours (whichever comes first) : Replace the hydraulic
cylinder oil seal and motor oil seal once.
Detail Photos
Our Hydraulic Rotary Steel Grapple Product Specification
| Model | Unit | HL60MGY | HL150MGY-3 | HL200MGY-3 | HL300MGY |
| External dimension |
mm | 1415*630 | 1740*750 | 2440*1255 | 2480*1260 |
| Max. opening width |
mm | 1500 | 1710 | 2250 | 2300 |
| Grasp weight |
kg | 1300 | 1400 | 2000 | 2500 |
| Rotating oil flow |
L/min | 25-35 | 30-40 | 30-40 | 30-40 |
| Rotating pressure |
Kg/cm2 | 80-120 | 90-120 | 100-130 | 100-130 |
| Operating oil flow |
L/min | 30-50 | 80-140 | 100-150 | 100-150 |
| operating pressure |
Kg/cm2 | 160-220 | 180-220 | 180-220 | 180-220 |
| Weight | kg | 360 | 850 | 1600 | 1800 |
| Suitable excavator |
ton | 5-8 | 12-18 | 18-24 | 25-36 |
Product Features
We Can Supply Following Excavator Model Attachments
| PC45MR PC56-7 PC60-7 PC70-8 PC60-6 PC40-7 PC40-8 PC60-2 PC60-5 PC60-6 PC75 |
| PC100-5 PC120-6 PC150-5 PC130-7 PC200-3 PC200-6 PC200-8 PC210LC-8 PC220-8 |
| PC240LC-8 PC300-3 PC300-5 PC300-6 PC300-7 PC360-7 PC400-3 PC400-5 PC600-6 |
| ZX60 ZX70 ZX100M-1 ZX120 EX60 EX60-2 EX60-3 EX60-7 EX100-1 EX120-5 EX120-6 |
| ZX200 ZX200-3 ZX230 ZX240 ZX240-3 EX200-1 EX200-2 EX200-3 EX200-5 EX200-6 |
| EX210-2 EX220-2 EX220-3 EX225-5 EX270 EX300-1 EX300-2 ZX330-3 ZX450H EX300-5 |
| EX450-5 EX550-3 EX700 EX750 EX1100-1 EX1200-5 EX1200-6 EX1800 EX2500-5 |
| E312 E315 E324D E320D E330 E329D E200B E240 E320 E320C |
| R60-7 130 R200-5 R215-7 R225-9 R210W-7 R220-5 R250-7 R260-7 R290-3 R300-5 R375-7 R305-7 R335-7 R300-3 R450 |
| SK07 SK60 SK75 SK60-8 SK120 SK120-3 SK130 SK200-8 SK200-6 SK250-8 SK210-6 |
| SK220-1 SK230-6 SK250-6 SK200-8 SK210-8 SK300-3 SK330-6 |
| DH60-7 DH80-7 DH130 DH215-7 DH215-9 DH220-5 DH220-2 DH220-3 DH225-7 DH280-3 |
| DH150 DH300 DH330-3 DH300-5 DH420LC-7 DH300-7 |
| EC210BLC EC140BLC EC290B EC360B EC210 EC240 |
| SH120 SH75 SH100 S280 S280FA S280F2 S281 S340 S265F2 SH200 SH200A3 |
| HD550 HD450 HD800-7 HD400SEM HD700-2 HD700-5 HD700-7 HD800SD-5 HD900-7 |
| HD820-2 HD820 HD770-1 HD770-2 HD880-1 HD850 HD250 HD400 |
Company Profile
Guangzhou Huilian Machinery Equipment Co., Ltd
Guangzhou Huilian Machinery Equipment Co., Ltd. is a professional development, production and sales of hydraulic crushers,quick couplers, high frequency vibration crushers, hydraulic shears, hydraulic crushers, stone apples, log grabs and other accessories for construction machinery.
Hydraulic grapple is widely used for handling, loading and unloading materials, sugarcane, wood, stone, steel slag, grabbing ,garbage, scrap metal and other special operations. As one of the leading Excavator attachment manufacturers in China, Huilian has a full range of grapples suitable for all kinds of brands excavators.
Application
Certifications
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}