| Customization: | Available |
|---|---|
| After-sales Service: | Online Service |
| Warranty: | 3 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Part name | Warranty period | warranty scope |
| Main structure | 12 | Damage caused by non-compliance with the operation specifications, cracking caused by reinforcement without the consent of the company is not within the warranty scope; 3 months steel plate cracking, cracking parts replacement; 3 months to steel plate, welding bead cracking within 6 months of the company to provide free maintenance, bear the one-way freight back to the factory; If the quality problem occurs within 6 months and 12 months, the company will provide free maintenance, only charge for the replacement parts, and no other costs will be borne. |
| Oil cylinder | 6 | The oil seal is guaranteed for 3 months. If the oil cylinder leaks, cracks or breaks within 3 months, the pipeline connection is correct and the new product will be replaced free of charge. If any problem occurs within 6 months, the company will repair it free of charge and only charge for the replacement parts. |
| Food valve | 3 | Do not add lubricating oil in time to cause excessive wear, wear to more than 3MM is not within the claim scope |
| pipeline | 3 | pipeline joint due to the quality of clamping joint burst warranty for 3 months, improper maintenance, external force collision, excessive adjustment of the overflow valve pressure caused by the damage manufacturers are not responsible for. |
| Shearing force | 1 | Shear knife blade non-external impact fracture free replacement, rolling edge, slag, knife body scratch loss, and operation directly related, not within the scope of quality assurance |
| The shaft pin belongs to the wearing parts, and it is easy to cause excessive wear when lubricating oil is not added, so it is not in the scope of warranty; All kinds of bolts and joints Pedal switch, all broken, broken parts are not covered by warranty | ||
Detail Photos
Product Parameter
Product Maintenance:
1. Daily checkpoint: Whether there is any damage or deformation of the body, hose interface leakage, damage to the pin and bushing and its replacement
cycle, check the bolt and nut tightening loose state, check the oil level of the
gear, check the gear loosening, tighten the bolt loosening. 2 . Conventional checkpoint: the seals and rotating parts of the hydraulic
cylinder will wear out, and should be replaced in time after reaching the
service life. Replacement parts should be matched with the original factory. 3. Check the tightening state of bolts, install new bolts, check 8 hours after use, and ensure that the tightened bolts are not loose. Damaged bolts should be
replaced in time. Bolts should be replaced after approximately 1500 hours or
12 months of use after installation. 4 . When the demolition shears are in use, it is recommended to check whether
there is oil leakage regularly to ensure no fault. 5. Every four hours (less frequent play) : fill lubricating oil, lubric
6. Every half year or 1000 hours (whichever comes first) : replace the hydraulic
cylinder oil seal and motor oil seal once. If the oil seal is not replaced within
the prescribed period, there is a certain probability that other parts of the
product will be damaged, such as: the cylinder pulled the cylinder body, etc.
Product selling point:
1.The use of CNC head boring process, high precision, high concentricity, more durable
2.Optional installation of acceleration valve
3.Light weight, good wear resistance; Using excavator bucket rod connection design, low failure rate, short working cycle, flexible operation
4.The blade is made of imported material (special alloy steel process), durable and easy to replace. Threaded hole design, if there is any material stuck, can be quickly eliminated by adjusting the blade
5.Integrated mechanical design, more durable, more bite force
6.The main knife plate is made of European Krup p material, and the body is designed by Q355B manganese plate, with high strength, light weight and good wear resistance
7.Wear - resistant wire, more bite force, durable
Product Features
Notes for product use:
Only reasonable and correct use of a good product can effectively improve work efficiency, but also ensure the service life of the product:
1. The pressure of crushing pliers shall be controlled within the specified range when used. If the pressure is too high, it is easy to damage the oil seal and other parts of the oil cylinder.
2. The teeth of the forceps head are wear-resisting head. When wear occurs in use, wear-resisting welding wire should be used in time to prevent serious wear and tooth head from being worn off.
3. Before the first use of new equipment, each grease nozzle should be thoroughly filled with butter until overflow, and hit at least 2 times per shift when used again. When using, it is required to bite with force, not side bias bite, and regularly maintain and replace the oil cylinder seal in time. (The oil seal is a vulnerable part. It is recommended to replace the oil seal once every 6-12 months according to the customer's use frequency. The damage of the oil seal is easy to strain the oil cylinder and cannot be repaired.)
4. After stopping the operation, timely check whether the bolt of the pipe joint and the oil cylinder is loose due to the collision of the seat caused by long time work, and find the phenomenon of oil leakage and
Bolt loosening can be manually tightened with after rods to avoid unnecessary losses!
5. When crushing pliers are placed for a long time, the oil cylinder can not suppress pressure and withdraw the oil cylinder for placement.
Good equipment depends on use and maintenance!
Company Profile
Guangzhou Huilian Machinery Equipment Co., Ltd
Guangzhou Huilian Machinery Equipment Co., Ltd. is a professional development, production and sales of hydraulic crushers,quick couplers, high frequency vibration crushers, hydraulic shears, hydraulic crushers, stone apples, log grabs and other accessories for construction machinery.
Hydraulic grapple is widely used for handling, loading and unloading materials, sugarcane, wood, stone, steel slag, grabbing ,garbage, scrap metal and other special operations, As one of the leading Excavator attachment manufacturers in China, Huilian has a full range of grapples suitable for all kinds of brands excavators.
Applications
Certifications
){kind=link}