| Customization: | Available |
|---|---|
| After-sales Service: | Online Support |
| Warranty: | 3 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Working Condition
| Suitable for sand and stone plant, river, coal, stone and other separation, filtration, scattered uniform materials, widely used in earthwork, demolition, mining, municipal and other fields. |
Component :
| 1.Hydraulic control system. |
| 2.Hydraulic power system. |
| 3.Riveting welding structure. |
| 2 hammer pipe(includingpilot return pipe,bidirectionalfoot valve.not includingexcavatorpipe |
SA*NY SY75C, SY215C, SY485H, SY16C, SY35U, SY35U-10, SY55C, SY55U, SY60C, SY70C, SY85C,
SY95C, SY115C, SY125C, SY135C, SY155C, SY195C, SY200C, SY205DPC, SY215C ACE, SY245H, SY265C,
SY285C, SY305H, SY335C, SY335H, SY365H, SY375H, SY395H, SY415H, SY485H, SYC6028, SY750H, SY750S,
SY65W, SY155W
Zoom*lion ZE75E-10, ZE135E-10, ZE205E-10, ZE60E-10, ZE155E-10, ZE215E-10, ZE245E-10, ZE365E-10, ZE485E-10
Ca*se CX360B, CX210B, CX75SR, CX36B, CX75, CX80C, CX700B, CX130C, CX130, CX130B, CX160C, CX180C, CX210B-EM,
CX210C-8, CX210C, CX220B, CX220C, CX240B, CX240C, CX260C, CX300B, CX300C, CX350C, CX380C, CX460, CX470B,
CX490C, CX500C, CX500D, CX800B, CX800CME, WX148, WX168, WX188, WX218
Tak*euchi TB210R TB216 TB20R TB215R TB218 TB128FR TB230 TB250 TB260C TB175S TB280FR TB290C TB295W
TB007 TB014 TB015 TB016 TB219 TB025 TB228 TB23R TB28FR TB035 TB135 TB235 TB138FR TB140 TB140C
| CA*TE:E311D. E312D. E315D.E200.E320.E325.E330.E345.E350.E365.E380.E385.E374..E390. |
| Volvo-: EC55/EC60/EC140/EC210.EC240.EC290.EC360LC.EC380.EC460.EC480.EC700.EC750 |
| Ko*matsu: PC200-1-2-34-5-6-7.PC300-1-2-3-4-5-6-7.PC400-3-5-6.PC450-6.PC600-6.PC650-3. PC650.PC800. PC1000.PC1200.PC1250.PC1800.PC2500.PC3600.PC4000.PC5000.PC6000.PC8000.D60A/E.D31. D50. D60E-EWL. D60ELGPD65-12.D155A-1.D155AX-3.D355-1.D355A-3.D275A-2.D375A-2-3D475/D575; |
| Hit*tachi:EX200-1-2-3-4-5-6.EX220-2.EX300-3-5.EX400-1-2-3-4.EX550.EX600.EX650.EX670.EX850.EX870.EX1100.EX1200.EX1800.ZAX200.ZAX230.ZAX240. ZAX250.ZAX300.ZAX330.ZAX350.ZAX400.ZAX450/ZX470/.ZAX670.ZAX700.ZAX850. ZAX870.ZAX1100.ZAX1250 |
| Hyu*ndai: R200.R200-5.R210.R220-5.R225LC-7.R265/R290.R290LC-3R290LC-7.R300LC.R305LC.R330LC.R375.R360LC-7.R450/R455.R805. |
| Da*ewoo/Doo*san:DH200.DH220-3-5.DH280-5.DH290.DH360.DH420.DH500.DH550.DH600; DX215.DX300.DX345 . DX350.DX380. |
| KOB*ELCO: SK200-1-2-3-4-5-6.SK210.SK230.SK250.SK260.SK280.SK300.SK310.SK320.SK330. SK330-6.SK350.SK400. SK430.SK450.SK460.SK480.SK500.SK600.SK800.SK850-8 |
| SU*MITOMO: SH100.SH120.SH130.SH200.SH200-3.SH210.SH220-2-3.SH230.SH240.SH280.SH300.SH350. SH400. SH450.SH460.SH700.SH700.SH800 |
| KAT*O: HD700.HD770.HD800.HD820.HD823.HD880.HD900.HD1023.HD1250.HD1430.HD1880.HD2045 |
| CA*SE: CX210.CX225.CX240.CX290.CX360.CX470.CX460.CX700.CX800. |
| JC*B: JS130.JS220.JS240.JS290.JS360.8056 |
| 1. The ideal working temperature of hydraulic oil is30'ºC ~50'c, and the temperature should not be too high |
| 2. The maximum working speed cannot exceed 40 |
| revolutions per minute, and the duration cannot exceed30 seconds. General working speed 20~35 RPM left anc |
| right rotation can normally screen materials, according |
| to the customer's actual material viscosity test to |
| achieve the best speed to achieve the best work |
| efficiency, flow regulation can be controlled by the |
| switch stop valve at the arm interface to adjust. |
| 3. Where lubricating oil needs to be filled: the shaft and |
| shaft pin are recommended to be filled once every 4 hours |
| 4. The outer cover of the transmission gear should be |
| checked from time to time whether the screw is loose to |
| ensure that the seal will not enter pollutants and |
| damage the gear. |
| Hydraulic Breaker Hammer | Lawn Mower | Eagle Shear | Drum Cutter | Control Sheeper Changer |
| Electromagnetic Chuck | Root Extractor | Hydraulic Pulverizer | Grass Grapple | Plate Compactor |
| Demolition Shear | Grass Grapple | Clamshell Bucket | Two Slide Arm | Rock Saw |
| Rotary Scraping Bucket | Two-Section Arm | Brick Clamp | Mechanical Grapple | Rake |
| Forest Scissor Shears | Rotary Steel Grapple | Root Splitting Shear | Double Cylinder Shear | Crushing Bucket |
| Log Grapple | Auger Drill | Thumb Screw | Sweeper | Stick Grab |
| Shovel Bucket | Pallet Fork | Electromagnetic Sucker | Jackdrill | Ripper |
| Orange Peel Grapple | Pile Hammer | Bale Breaker | Quick Hitch Coupler | Electric Holding Grapple |
| Cars Disassemble Shear | Screening Bucket | Tamping Hammer | Cotton Grapple | Digging Chain |
We are manufacturer from Guangzhou and have been in this industry over decades.our main products cover Hydraulic Breaker Parts,Excavator Parts and OEM Hydraulic Seals.with good quality and pretty competitive prices. Also we have our own professional designers to meet any of your requirements.
We are also SAN*Y and Park*er Global General Agent in China
Q1. How many days for the delivery time ?
It is about 1-7 working days after the order confirmation.
Q2. What kind of payments you accept?
Now we accept T/T,L/C or Western Union,other terms also could be negotiated,Recommended Trade Assurance to guarantee buyer's property.
Q3. Are you able to manufacturing products according to customer's design?
Sure,we have made many special orders from oversea for 10 years since 2010. So we have enough ability to deal with any cases. OEM certificate is available to provided.
Q4. What's your advantages in the machinery manufacturing industry?
Fast delivery time,High quality products,Best customer service,Adopting the latest production technology.
Q5. Which countries have you been exported recently?
Canada,Australia,Peru,Egypt,Brazil,Mexico,South Africa,etc.
Q6. Are you sure that your product will fit our hydraulic breaker?
We have different brand hydraulic breakers. Show me your model number,and we can give you best match products.
Q7. How about the packing of the goods?
Standard export package,wood cases,or as customers' demands.
){kind=link}